stroke adjustable cylinder Sold to Sudan

This article mainly introduces:

Sudan hydraulic cylinder,stroke adjustable cylinder manufacturer,stroke adjustable cylinder

(Sudan stroke adjustable cylinder,produced by Hengyu Hydraulic Co., Ltd）

stroke adjustable cylinder are widely used in Sudan，because of high work efficiency，excellent fatigue and impact resistance，no need for deceleration device.So our company has designed stroke adjustable cylinder for customers from Sudan.

Introduction to stroke adjustable cylinder:

The stroke adjustable cylinder should be vented: when the stroke adjustable cylinder is installed or parked for a long time to work again, the air will penetrate into the stroke adjustable cylinder and the pipeline system. In order to prevent the abnormal phenomenon of crawling, noise and heating of the actuator, the air in the stroke adjustable cylinder and the system should be discharged. In order to facilitate the removal of air deposited in the stroke adjustable cylinder, the oil is best entered and discharged from the highest point of the stroke adjustable cylinder. stroke adjustable cylinders that require higher motion stability are often equipped with exhaust plugs at both ends. Before working, unscrew the exhaust plug to make the piston go back and forth several times without load in the whole stroke, and the air can be discharged through the exhaust plug. After the air is drained, tighten the exhaust plug before working.

The material of the sliding part of the stroke adjustable cylinder piston sintered casting piston will cause sintering phenomenon when subjected to large transverse load. In this case, the sliding part of the piston should be made of copper alloy or welded to such material.

The piston rod and guide sleeve function of the stroke adjustable cylinder is crucial: the relative motion pair between the piston rod and the guide sleeve is the main factor causing external leakage, if the chrome layer on the surface of the piston rod is spalling or producing longitudinal tensile marks due to wear, it will directly lead to the failure of the seal.

When the stroke adjustable cylinder is disassembled due to oil leakage and other faults, the position of the piston should be moved to any end position of the stroke adjustable cylinder by applying liquid pressure. Improper tapping and sudden drop should be avoided during disassembly.

Answers to some questions about stroke adjustable cylinder:

What is the material of the cylinder support ring?
Generally, it is polytetrafluoroethylene doped with copper powder, or polyformaldehyde, and copper sleeves, there are also nylon, resin and so on.

How does the self-locking cylinder work?
Hydraulic cylinder self-locking is divided into oil self-locking and mechanical self-locking. The oil circuit itself is equipped with a valve to maintain pressure, so that the hydraulic oil of the cylinder does not return to the tank, and the oil chamber of the cylinder is filled with a certain pressure of oil. However, this pressure holding self-locking is not very safe and reliable, and the plunger will slowly return if there is a leak. Mechanical self-locking is to install a nut on the plunger of the cylinder, and when the cylinder rises to the required position, the nut on the cylinder plunger is rotated to the end, and the cylinder block is in contact, so that the plunger will be fixed to the required height. When it is necessary to relieve the pressure, screw the nut on again and let the plunger return to the position. This kind of cylinder has a special name, called self-locking hydraulic cylinder.