unidirectional cylinder Sold to Mexico

This article mainly introduces:

Mexico hydraulic cylinder,unidirectional cylinder manufacturer,unidirectional cylinder

(Mexico unidirectional cylinder,produced by Hengyu Hydraulic Cylinder Factory）

unidirectional cylinder are widely used in Mexico，because of smooth movement，high work efficiency，excellent fatigue and impact resistance.So our company has designed unidirectional cylinder for customers from Mexico.

Introduction to unidirectional cylinder:

The definition of the minimum stable speed refers to the minimum movement speed of the unidirectional cylinder without crawling phenomenon when the full load is moving, it has no uniform indicator, and the unidirectional cylinder that undertakes different work has different requirements for the minimum stable speed.

Factors that should be considered when selecting the oil seal in the unidirectional cylinder: some specific factors should be taken into account when selecting the oil seal in the unidirectional cylinder, so as to have correct consideration and get accurate results, and then avoid wrong selection. The factors and aspects that should be taken into account are eight: unidirectional cylinder diameter, piston rod diameter, piston rod and piston groove size, unidirectional cylinder working pressure, unidirectional cylinder movement speed, hydraulic system oil temperature and unidirectional cylinder working environment.

We can not just consider the price and ignore the quality when we purchase the unidirectional cylinders. Now some manufacturers produce unqualified products in order to reduce costs, the piston rod is not adjusted, the rod coating is not enough, the unidirectional cylinder finish can not reach, the guide sleeve should use copper, but instead of ductile iron, although the cost is reduced, the quality of the unidirectional cylinder is not required.

The main role of the unidirectional cylinder: the unidirectional cylinder is an executive element in the hydraulic transmission system, which is an energy conversion device that converts hydraulic energy into mechanical energy. The hydraulic motor realizes continuous rotary motion, while the unidirectional cylinder realizes reciprocating motion. The structure of the unidirectional cylinder has three categories: piston unidirectional cylinder, plunger unidirectional cylinder, swing unidirectional cylinder, piston unidirectional cylinder and plunger unidirectional cylinder to achieve reciprocating linear motion, output speed and thrust, swing unidirectional cylinder to achieve reciprocating swing, output angular speed (speed) and torque. In addition to the single use of the unidirectional cylinder, two or more can be combined or used in combination with other mechanisms. To fulfill a special function. The unidirectional cylinder has simple structure and reliable operation, and has been widely used in the hydraulic system of machine tools.

Answers to some questions about unidirectional cylinder:

Why is a light cylinder less productive than a heavy cylinder at the same oil pressure?
f=ps Under the same pressure, the larger the area, the greater the output, but the maximum pressure can not exceed the system engineering pressure of the cylinder!

What is the relationship between medium cylinder and side cylinder ratio of forklift truck?
The middle cylinder and the side cylinder seem to have no relationship, as long as the lifting speed required by the design can be ensured, but the diameter of the cylinder can not be too thin, so as to avoid the middle cylinder acting first when the high gantry vibration lifting, and then the two cylinders acting again.