pipe bender hydraulic cylinder Sold to Nigeria

This article mainly introduces:

Nigeria hydraulic cylinder,pipe bender hydraulic cylinder manufacturer,pipe bender hydraulic cylinder

(Nigeria pipe bender hydraulic cylinder,produced by Hengyu Group）

pipe bender hydraulic cylinder are widely used in Nigeria，because of no transmission clearance，powerful torque，clever hydraulic energy conversion.So our company has designed pipe bender hydraulic cylinder for customers from Nigeria.

Introduction to pipe bender hydraulic cylinder:

Protection of the pipe bender hydraulic cylinder surface: During the dismantling process, safety protection should be carried out on the pipe bender hydraulic cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the pipe bender hydraulic cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the pipe bender hydraulic cylinder should be cleaned up in time.

In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular pipe bender hydraulic cylinder action. Troubleshooting method: Replace the rubber hose.

The meaning of the pipe bender hydraulic cylinder model marked by the pipe bender hydraulic cylinder manufacturer: for example, 160/100-1150, its meaning: from a professional point of view, 160 refers to the pipe bender hydraulic cylinder diameter, which is 160mm, and the 100 behind refers to the rod diameter, which is 100mm. The 1150 refers to the pipe bender hydraulic cylinder stroke, which is 1150mm. Therefore, on this point, we should have a correct understanding and can not make mistakes.

When producing oil pipe bender hydraulic cylinders, there are two processing processes, grinding and rolling, the latter is better than the former. Rolling machining is a kind of non-cutting machining, using the plastic deformation of the metal at room temperature, so that the micro roughness of the workpiece surface is flattened to achieve the purpose of changing the surface structure, mechanical characteristics, shape and size. Therefore, this method can achieve the two purposes of finishing and strengthening at the same time, which can not be done by grinding.

Answers to some questions about pipe bender hydraulic cylinder:

Is it normal for the cylinder to turn black?
Cylinder blackening is a soft fault: 1. It does not affect the normal operation of your equipment. 2. Cylinder blackening involves a lot of things: hydraulic oil, oil seal material, piston rod coating, etc. These three things are not determined by the manufacturer because these three things are provided by other manufacturers. If the equipment is not due to high temperature caused by the black cylinder, you do not have to worry too much because your excavator can still work normally. If you feel uncomfortable, you can choose to replace the cylinder or replace the hydraulic oil.

Does the sealing string of the upper and lower chamber of the hydraulic cylinder fall by itself?
It is possible, the probability accounts for 85% (depending on the weight), the weight is less than the system resistance, may not fall, the weight is greater than the system resistance, will not necessarily fall, so often check the equipment, safety first, find the problem in time to solve, the cylinder is not very expensive parts, maintenance does not cost much money, However, accidents caused by cylinder failure will lose several times the cost.