servo hydraulic cylinder Sold to Switzerland

This article mainly introduces:

Switzerland hydraulic cylinder,servo hydraulic cylinder manufacturer,servo hydraulic cylinder

(Switzerland servo hydraulic cylinder,produced by Hebei Hengyu company）

servo hydraulic cylinder are widely used in Switzerland，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed servo hydraulic cylinder for customers from Switzerland.

Introduction to servo hydraulic cylinder:

When the servo hydraulic cylinder is in use, once the seal and guide support ring are found to be defective, the seal with the same structural form and appropriate material should be replaced according to the structural form of the servo hydraulic cylinder seal to be repaired, so as to minimize the thickness of the oil film between the seal and the sealing surface and reduce the leakage of the seal.

servo hydraulic cylinder daily maintenance, should focus on checking whether the piston rod surface roughness and shape and position tolerance meet the technical requirements, if the piston rod bending should be calibrated to meet the requirements or according to the physical mapping, manufactured by a professional manufacturer. If the piston rod surface coating wear, slip damage, local spalling can be adopted to remove the coating, re-chrome surface processing process.

How the cavitation of the servo hydraulic cylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the servo hydraulic cylinder, resulting in corrosive damage to the parts.

The internal leakage of the servo hydraulic cylinder should be prevented when the servo hydraulic cylinder is used. The internal leakage of servo hydraulic cylinder includes the leakage caused by excessive wear of servo hydraulic cylinder block seal, piston rod and seal cover seal and piston seal. The cause of sealing leakage between the piston rod and the seal cover is that the seal is wrinkled, squeezed, torn, worn, aging, deterioration, deformation, etc., and a new seal should be replaced at this time.

Answers to some questions about servo hydraulic cylinder:

Why does the cylinder pop out of itself when it stops?
This situation has two possibilities, 1. There is more air in the system, so exhaust the gas. 2. The back pressure of the oil return is relatively large, check the oil return filter, check whether the cylinder has a rod cavity buffer is too tight, and choose a 3-position 4-way M-type valve for the reversing valve. In addition, after the shutdown, manually change the reversing valve back and forth several times, it should not rise out.

How big is the motor and oil pump for the 80 cylinder?
Pump motor selection is not only related to cylinder diameter but also speed system, it is recommended to provide system diagram and speed requirements, generally speaking, most of the 80 cylinder on the market is equipped with 3-4KW motor, 10-20 oil pump.