series synchronous cylinder Sold to Ecuador

This article mainly introduces:

Ecuador hydraulic cylinder,series synchronous cylinder manufacturer,series synchronous cylinder

(Ecuador series synchronous cylinder,produced by Hebei Hengyu company）

series synchronous cylinder are widely used in Ecuador，because of clever hydraulic energy conversion，no transmission clearance，powerful torque.So our company has designed series synchronous cylinder for customers from Ecuador.

Introduction to series synchronous cylinder:

The series synchronous cylinder body is commonly made of No. 20, 35, 45 seamless steel pipe, and the steel pipe is honed or rolled to achieve the roughness requirement within 0.4μm. The low pressure series synchronous cylinder can use 20 steel pipe, and the high pressure series synchronous cylinder can use 45 steel pipe.

Protection of the series synchronous cylinder surface: During the dismantling process, safety protection should be carried out on the series synchronous cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the series synchronous cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the series synchronous cylinder should be cleaned up in time.

The viscosity of the working oil used in the series synchronous cylinder is 29~74mm2/S, and ISO VG46 anti-wear hydraulic oil is recommended. Working oil temperature within the range of -20~80. C. When the ambient temperature and service temperature are low, the oil with lower viscosity can be selected.

The oil series synchronous cylinder is a part of the hydraulic system, in the hydraulic system, to reasonably design the heat dissipation system, to prevent the oil temperature is too high is the key to keep the hydraulic oil temperature normal. The temperature of the system should be kept in a suitable range to reduce the energy released when the bubble bursts. While not affecting the normal circulation of the coolant, a certain amount of anti-corrosion additives can be appropriately added to inhibit rust. When operating the hydraulic system, we should strive to be stable, not too fast, too strong, and try to reduce the impact of hydraulic oil on hydraulic components.

Answers to some questions about series synchronous cylinder:

The cylinder is moving too fast. I want to slow it down. What can I do?
The hydraulic cylinder is the execution action, and the power source is the hydraulic system. The cylinder speed is too fast, indicating that the system flow is large, the hydraulic system has a hydraulic valve responsible for speed control function, method: 1, by adjusting the speed control valve to reduce the speed; 2, the speed control valve has been adjusted to the lowest, indicating that the hydraulic system design flow is too high, the need to re-configure the hydraulic system according to demand, or the cylinder diameter is changed.

Why is a light cylinder less productive than a heavy cylinder at the same oil pressure?
f=ps Under the same pressure, the larger the area, the greater the output, but the maximum pressure can not exceed the system engineering pressure of the cylinder!