grate cooling hydraulic cylinder Sold to India

This article mainly introduces:

India hydraulic cylinder,grate cooling hydraulic cylinder manufacturer,grate cooling hydraulic cylinder

(India grate cooling hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd）

grate cooling hydraulic cylinder are widely used in India，because of smooth movement，clever hydraulic energy conversion，no need for deceleration device.So our company has designed grate cooling hydraulic cylinder for customers from India.

Introduction to grate cooling hydraulic cylinder:

Protection of the grate cooling hydraulic cylinder surface: During the dismantling process, safety protection should be carried out on the grate cooling hydraulic cylinder to prevent objects from falling and welding slag from falling to the surface, causing damage to the grate cooling hydraulic cylinder surface. In the process of propulsion, the damaged pipe segments should be prevented from falling and smashing, and the slurry remaining on the surface of the grate cooling hydraulic cylinder should be cleaned up in time.

Analysis of commonly used seals: The wear ring and slip ring commonly used on the grate cooling hydraulic cylinder are generally made of polytetrafluoroethylene + graphite, because pure polytetrafluoroethylene is easy to produce plastic creep, which is only suitable for low pressure and low wear resistance conditions. If the sealing ring used is a composite material formed after adding graphite filler, the performance can be effectively improved, the ability to resist plastic creep is increased by 2 to 3 times, the initial deformation caused by the load is reduced by 30 to 60% : the rigidity is increased by 2 to 3 times: the dimensional stability under heat is increased by 2 times, and the hardness is increased by l0 to 15%.

We can not just consider the price and ignore the quality when we purchase the grate cooling hydraulic cylinders. Now some manufacturers produce unqualified products in order to reduce costs, the piston rod is not adjusted, the rod coating is not enough, the grate cooling hydraulic cylinder finish can not reach, the guide sleeve should use copper, but instead of ductile iron, although the cost is reduced, the quality of the grate cooling hydraulic cylinder is not required.

The definition of the minimum starting pressure of the grate cooling hydraulic cylinder refers to the minimum working pressure of the grate cooling hydraulic cylinder in the no-load state, which is a comprehensive index reflecting the manufacturing and assembly accuracy of the grate cooling hydraulic cylinder parts and the size of the sealing friction.

Answers to some questions about grate cooling hydraulic cylinder:

What are the problems that cause hydraulic cylinder shaking?
1, the oil supply is not smooth, the hydraulic oil filter is half blocked. 2. The oil level in the oil storage tank is lower than the minimum oil level. 3, there is air in the hydraulic system. 4, the supply oil pump is damaged or not working properly. 5, the hydraulic oil is not replaced for a long time.

Does the excavator use a hydraulic cylinder?
First, construction machinery is generally a hydraulic cylinder. Second, hydraulic transmission equipment is usually composed of four components, power, execution, control and auxiliary. And the hydraulic cylinder as a linear reciprocating motion or less than 360. Reciprocating motion of the hydraulic mechanism, simple structure, reliable work, is also widely used in the hydraulic system of the main actuator, it is the prime mover in the form of mechanical energy to drive the hydraulic pump produced by the liquid pressure energy, and then can be directly driven load for reciprocating movement or less than 360.