pressure plate hydraulic cylinder Sold to Pakistan

This article mainly introduces:

Pakistan hydraulic cylinder,pressure plate hydraulic cylinder manufacturer,pressure plate hydraulic cylinder

(Pakistan pressure plate hydraulic cylinder,produced by Hebei Hengyu company）

pressure plate hydraulic cylinder are widely used in Pakistan，because of simple structure and reliable operation，excellent temperature resistance，no transmission clearance.So our company has designed pressure plate hydraulic cylinder for customers from Pakistan.

Introduction to pressure plate hydraulic cylinder:

Regular maintenance of the pressure plate hydraulic cylinder includes: regular tightening, pressure plate hydraulic cylinder fastening screws and gland screws, pressure plate hydraulic cylinder piston rod stop adjustment screws, should be tightened once a month, tighten each screw evenly, and achieve the corresponding tightening torque. Replace the seal regularly, it is recommended to replace the seal of the pressure plate hydraulic cylinder once a year. Clean regularly, the pressure plate hydraulic cylinder is cleaned every other year, and the seals are replaced while cleaning.

The pressure plate hydraulic cylinder should be used correctly and maintained regularly. The pressure plate hydraulic cylinder should be deflated before use, the buffer regulating valve should be adjusted to a reasonable position, the cleanliness of the oil should be checked regularly, the dust on the pressure plate hydraulic cylinder should be cleaned regularly, and attention should be paid to waterproof and fireproof.

pressure plate hydraulic cylinder buffer valve inspection and maintenance: For the valve buffer pressure plate hydraulic cylinder, the focus should be on checking the wear of the buffer valve spool and seat. Once it is found that the amount of wear increases and the seal fails, it should be replaced. It can also be repaired by using abrasive spool and seat matching grinding method.

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

Answers to some questions about pressure plate hydraulic cylinder:

What is a hydraulic cylinder assembly?
Assembly, which means aggregate. A series of parts or products, formed to achieve a specific function of the whole, the general term for this system is assembly. The hydraulic cylinder assembly is not a single hydraulic cylinder part, which can be used by connecting the hydraulic hose.

How to distinguish high pressure cylinder and low pressure cylinder?
There is no special definition of the cylinder, the so-called pressure classification refers to the pump low pressure (code L) container 0.1MPa ≤p < 1.6MPa; Medium pressure (code M) container 1.6MPa ≤p < 10.0MPa; High pressure (code H) vessel 10 MPa≤p < 100 MPa; Ultra-high pressure (code U) container p≥100MPa. (1MPa=9.8Kg)