push bench hydraulic cylinder Sold to Argentina

This article mainly introduces:

Argentina hydraulic cylinder,push bench hydraulic cylinder manufacturer,push bench hydraulic cylinder

(Argentina push bench hydraulic cylinder,produced by Hengyu Hydraulic Co., Ltd）

push bench hydraulic cylinder are widely used in Argentina，because of long service life，smooth movement，high work efficiency.So our company has designed push bench hydraulic cylinder for customers from Argentina.

Introduction to push bench hydraulic cylinder:

push bench hydraulic cylinder and hydraulic station selection: Select the type and structure of the push bench hydraulic cylinder according to the operation requirements of the main engine. According to the external load force borne by the push bench hydraulic cylinder, such as gravity, friction force of the external mechanism, inertia force and working load, determine the load change law of the push bench hydraulic cylinder in each stage of the stroke and the power value that must be provided. Determine the diameter of the piston and piston rod according to the working load of the push bench hydraulic cylinder and the selected oil working pressure. the flow rate of the hydraulic pump is determined according to the movement speed of the push bench hydraulic cylinder, the diameter of the piston and the piston rod.

The push bench hydraulic cylinder can not be used as grounding electrode to avoid electric damage to the piston rod.

The push bench hydraulic cylinder pipe should not be left behind when deburring at both ends after the fixed length processing. In addition, the placement of steel pipes near the site of welding pipeline operations is the cause of welding foreign objects. The pipes placed near the welding operation site should be sealed. It must also be noted that pipe fitting materials should be fully prepared on a dust-free workbench.

The body of the push bench hydraulic cylinder on the processing process requirements: the body of the push bench hydraulic cylinder is an important and essential part of the push bench hydraulic cylinder, because it has an irreplaceable role. The processing requirements for this part are very high, requiring that the surface roughness of the push bench hydraulic cylinder after processing should reach 0.4-0.8um, and the coaxiality and wear resistance requirements are also very high.

Answers to some questions about push bench hydraulic cylinder:

Cylinder pressure calculation formula
The pressure of the cylinder at work is determined by the load, and the pressure of the physical force is equal to the force divided by the area of action (that is, P=F/S). If you want to calculate the output force of the cylinder, you can calculate it according to the formula: Set the radius of the piston (that is, the cylinder) is R (unit mm) the radius of the piston rod is r (unit mm) the working pressure P (unit MPa) the thrust of the cylinder F push =3.14*R*R*P (unit N) The pulling force of the cylinder F pull =3.14* (R*R-r* R) *P (unit N).

How many boom cylinders, bucket rod cylinders and bucket cylinders are there in a small single-bucket excavator?
one for bucket, one for forearm, only one piece for a small excavator under the big arm, two pieces for medium and large excavator.