series synchronous cylinder Sold to Slovakia

This article mainly introduces:

Slovakia hydraulic cylinder,series synchronous cylinder manufacturer,series synchronous cylinder

(Slovakia series synchronous cylinder,produced by Hengyu Group）

series synchronous cylinder are widely used in Slovakia，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed series synchronous cylinder for customers from Slovakia.

Introduction to series synchronous cylinder:

At the rated pressure, the thrust of the series synchronous cylinder is determined by what factors: at the rated pressure of the oil pump, the work done by the series synchronous cylinder is related to the diameter of the series synchronous cylinder, but not to the stroke of the series synchronous cylinder. Moreover, the larger the series synchronous cylinder diameter, the larger the area, and the greater the pressure obtained. To this point, we should have a correct understanding and clear understanding, so as to avoid problems in the use of the series synchronous cylinder.

When the series synchronous cylinder is in use, ensure that the series synchronous cylinder and the surrounding environment should be clean. The tank should be sealed to prevent contamination. Pipelines and fuel tanks should be cleaned to prevent falling off the oxide sheet and other debris. Clean with lint-free cloth or special paper. Twine and binder should not be used as sealing materials. Hydraulic oil according to the design requirements, pay attention to the change of oil temperature and oil pressure. When there is no load, unscrew the exhaust bolt for exhaust.

series synchronous cylinder diameter, rod diameter, stroke determination: Choose national standards or other standards series synchronous cylinder, avoid the selection of non-standard size, otherwise the difficulty of processing and manufacturing costs will be increased. The length of the series synchronous cylinder guide is determined by the length of the stroke. Check the strength of series synchronous cylinder, piston rod, screw, etc. according to the working pressure or load. At the same time, working pressure, ambient temperature, working medium and running speed are also the key to selecting seals.

The repair method of the series synchronous cylinder: the repair of the series synchronous cylinder must use brush plating. This is because this repair method can be carried out on site, and the repair effect is good. In this way, loading and transportation can be eliminated to shorten the repair time and improve work efficiency. In addition, the coating obtained by brush plating has good binding force and will not have obvious boundaries. Moreover, the repair surface has high hardness and good wear resistance.

Answers to some questions about series synchronous cylinder:

What steel pipe does hydraulic cylinder use? This problem is very general. Carbon steel pipe or ordinary seamless steel pipe are all ok, but then there are rolling, quilting, heat treatment and other steps, and the requirements are different, the wall thickness is different, the material is different. It depends on the circumstances.

What is a hydraulic cylinder assembly?
Assembly, which means aggregate. A series of parts or products, formed to achieve a specific function of the whole, the general term for this system is assembly. The hydraulic cylinder assembly is not a single hydraulic cylinder part, which can be used by connecting the hydraulic hose.