push plate cylinder Sold to Jordan

This article mainly introduces:

Jordan hydraulic cylinder,push plate cylinder manufacturer,push plate cylinder

(Jordan push plate cylinder,produced by Hengyu Group）

push plate cylinder are widely used in Jordan，because of clever hydraulic energy conversion，simple structure and reliable operation，excellent temperature resistance.So our company has designed push plate cylinder for customers from Jordan.

Introduction to push plate cylinder:

When the push plate cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the push plate cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

When the push plate cylinder is kept, do not pay attention to keeping the oil port open, which will produce the condition of accepting foreign bodies at all times, which is absolutely not allowed. Storage must be filled with anti-rust oil or working oil, and plug.

How to repair the push plate cylinder body when it is damaged: When the push plate cylinder has trace deformation and shallow tensile marks, the push plate cylinder is repaired by strong honing process. The heavy honing process can repair push plate cylinders up to 2.5 times out of tolerance than the original tolerance. It honed the parts with excessive size or shape error through a powerful honing machine, so that the overall size, shape tolerance and roughness of the push plate cylinder can meet the technical requirements.

The advantages and disadvantages of the push plate cylinder: the surface of the push plate cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the push plate cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

Answers to some questions about push plate cylinder:

What parameters do I need to provide when purchasing hydraulic cylinders?
The main technical parameters of the hydraulic cylinder: 1. Cylinder diameter; Cylinder diameter, inner diameter size; 2. Piston rod diameter; 3. Cylinder stroke; 4. Cylinder pressure; The working pressure of the cylinder is often calculated using the test pressure, which is less than 16MPa multiplied by 1.5 and higher than 16 multiplied by 1.255. Import and export diameter and thread parameters; 6. Whether there is buffer; According to the working conditions, the piston rod extension contraction is generally buffered if the impact is large. 7. Installation method of oil cylinder, etc.

Is it good or bad for the hydraulic cylinder working in the limit stroke position?
It is not good for the hydraulic cylinder working in the limit stroke position. Generally, when the cylinder is used in the limit stroke, the oil in the cylinder will form a backflow back pressure impact on the piston and guide sleeve seals. If the limit is not accurate, it is easy to cause collision damage. It is recommended to leave a buffer of ten to twenty centimeters.